Adhesive Makroflex Pu Adhesive EPS. XPS. 750 ml

Brand - Makroflex. Type of adhesive - Polyurethane. Areas of use for the adhesive - Concrete. Insulation casings. Metal. Glass. Tiles. Wood. Gypsum. Bricks. Cork material. Polystyrene. Ceramics. Color of the adhesive - Gray. Volume - 0.75 l. Store at temperature - 5 - 25°C. Fully dries after - 2 - 3h. Can be painted - Yes. Water resistance - Yes. Signal word - DANGEROUS. Hazard phrase - H317 May cause an allergic skin reaction. H332 Harmful if inhaled. H372 Harms organs ; if the substance acts long-term or repeatedly . Precautionary phrase for prevention - P102 Keep out of reach of children. P211 Do not spray on an open flame or other ignition source. P260 Do not breathe dust/fume/gas/mist/vapors/spray. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves/wear protective clothing/use eye (face) protection/use hearing protection. Precautionary phrase for storage - P410 + P412 Protect from sunlight. Do not store at temperatures exceeding 50 °C/122°F. Precautionary phrase for disposal - P501 Dispose of contents/container in accordance with local/regional/national/international regulations. Additional information - Brick masonry – indoor and outdoor work. Apply the adhesive „Makroflex PU- Adhesive“ in parallel strips along the edges of horizontal and vertical blocks. If the wall thickness is < 11.5 cm, apply 1 strip, if > 11.5 cm – apply an additional one. Leave a 3–5 cm gap from the edges; Attention! The first row of blocks can be mounted on the adhesive „Makroflex PU- Adhesive“ only if the base is completely flat and level. Otherwise, lay the first row of blocks on mortar and level it. Block adjustment time – no longer than 1 min. Once a block is attached, if removed, it must be covered