ABRASIVE Stone 250x50x25

Abrasive stone for "opening" a diamond disc Disc for renewing the sharpness of the blade, any diamond disc can be "opened" and lose its cutting properties. This happens particularly often when cutting hard materials such as porcelain stoneware, marble, non-abrasive ceramics, etc. Diamonds fall out and new ones don't open, due to the cutting process material does not have enough abrasive, then the blade burns and does not cut. There is a risk damage to your blade. The disc needs to be sharpened. Sharpening means multiple cuts on abrasive material MECHANIC ABRASIVE stone sharpens diamond discs perfectly. It correctly combines the size and strength of the abrasive grains, specially selected for opening diamond tools. To do this, it is necessary to perform several longitudinal cuts with a blunt diamond layer. With an angle grinder we make cuts up to 5 mm deep. For tile cutters, we use blades up to 10 mm deep. It is recommended to open the discs for ceramics on the light side of the bar, for granite, marble on the dark side. On average, 10-15 cuts are required, and your blade is sharp again. The size of the abrasive belt is 250 * 50 * 25 mm. For bevel cutting grinders, it is recommended to clamp the tape with a clamp.

Manufacturer: SVP T-noVa