Anchor for Insulation Materials FID80 II, Fischer, 2 pcs

Fischer FID II Plus anchor is suitable for medium-weight attachments, such as parcel boxes, to be mounted on external thermal insulation composite systems. • Compatible with standard screws with a diameter of 4.5 - 6 mm. • Using an additional chemical component, such as Fischer Fill&Fix or Fischer PU foam, can significantly increase load capacity. • Maximum stability due to glass-fiber-reinforced plastic. • The anchor edge is not visible even with narrow attachments due to the minimal head diameter. • Thanks to the special tip geometry, the anchor can be screwed through plaster layers up to 10 mm thick without pre-drilling, saving time. • The FID II is easily screwed in using a standard TX40 screwdriver bit. • Fischer insulation anchor is compatible with all common insulation materials.

Manufacturer: Fischer | Fastener length, mm: 80 | Fastener type: Pin | Purpose of the fastener: Putų polistirolas (EPS) | Purpose of the fastener: Ekstruzinis polistirolas (XPS) | Purpose of the fastener: Mineralinė vata | Bortel: With kerb | Units per pack, pcs.: 2