Bitumen-rubber mastic 10kg Nexler Dysperbit water-based

Widely used ready-to-use dispersion bitumen-rubber mastic. No additional agents needed for dilution. Very good adhesion to mineral bases. Can be applied to dry and wet substrates. Use a brush or spatula for application. Safe in contact with polystyrene. Resistant to precipitation for about 5 hours after application.

Technical data:

• Consumption for priming 0.2 kg/m², for roofing 0.5 kg/m² per layer, for waterproofing 1.5 kg/m²/mm
• Film formation time up to 6 hours
• Time between applying subsequent layers about 5 hours
• Weight 10 kg